|
|
Paramete
Earphone
Item: Wireless stereo earphone Version: TWS
Profiles: Supports HFP 1.7,HSP 1.2,A2DP 1
AVRCP 1.6, SPP 1.2 and PBAP 1.0
Transmit power: Class 2
Frequency Range: 2.402GHz~2.480GHz Talkin time: 4-6 Hours(Full charge)
Music: 4-6H(Full charge)
Battery: Polymer 3.7V>50mA Charing time: 1-2Hours
Charging box
Input: 5V Above 600mA Output: 5V 1A
Battery: Refer to the box label
Charging box
Input: 5V Above 600mA Output: 5V 1A
Battery: Refer to the box label
How to use
When using for the first time, put 2 earphones into the charging compartment to activate the automatic power-on
and automatic pairing, and then take out 2 earphones at the same time, the earphones will automatically turn on
and enter the pairing state,wait for about 10 seconds, one of the earphones turns off, and the other One earphone
continues to flash red and blue light, indicating that the two earphones have been paired successfully.
If the two earphones are still flashing red and blue lights,
you need to wait for about 20 seconds until one of them is off, then turn on the Bluetooth function of the mobile
phone to search for signals and connect for use.
If both ears are still flashing and cannot be successfully paired,
it is recommended to pair in an open environment without signal interference.
Occasionally, due to signal in terference, both ears cannot be paired.
Please wait patiently for the pairing to succeed before connecting to the mobile phone.
|
Double-Click: Prev.Song
Click 3 times: Volume –
|
|
Double-Click: Next Song
Click 3 times: Volume +
|
| |
Headset(L)
|
|
Headset(R)
|
Answering a call and hanging up: When there is an incoming call, press the headset button to answer.
After the call is over, press the headset button again to hang up the call.Reject incoming calls:
long press the headset button for 2 seconds to reject incoming calls.Start Siri on the phone:
Press and hold the headset button for about 1 second to hearthe prompt "voice dialing" - release,
the Siri function on the phone has been activated.
close after
The 2nd connection and use: For the mobile phone that has been connected to the headset,
take out the headset in the charging box at the same time for the second use,
and automatically turn on and connect to the mobile phone without any operation.
You are using a different mobile phone, you need to search for the signal again and connect it.
Use alone:
Use the headset(L)orthe headset(R)alone,turn it on,turn on the mobile Mobile phone connection settings
search“TWS”(or the model that matches thelabel of the box),after the device flashes
red and blue,click to open the connection and use it
LED Indicator Status
Paired state:alternating flashing ofred and blue lights
Charging status:red light is always on
Charging completed:red light off
Notice!
· Do not drop,impact,scrape,twist,knock,crush,
· Keepheadsetsaway from magnets,appliancesand speakerswhenusing them
· Avoid putting headsets in extreme temperatures
(normal operating environment- 10℃~45℃)
When the earphones battery level is low
The headphones wil repeat a"battey levellow please recharge"voice message
Friendly reminder:
Please use a regular 5V 1A charger to charge the charging box, do not use inferior
chargers, which will cause short-circuit damage to the charging box or earphones!
|
|
|